NAME¶

virt-alignment-scan - Check alignment of virtual machine partitions

SYNOPSIS¶

 virt-alignment-scan [--options] -d domname
 virt-alignment-scan [--options] -a disk.img [-a disk.img ...]
 virt-alignment-scan [--options]

DESCRIPTION¶

When older operating systems install themselves, the partitioning tools place partitions at a sector misaligned with the underlying storage (commonly the first partition starts on sector 63). Misaligned partitions can result in an operating system issuing more I/O than should be necessary.

The virt-alignment-scan tool checks the alignment of partitions in virtual machines and disk images and warns you if there are alignment problems.

Currently there is no virt tool for fixing alignment problems. You can only reinstall the guest operating system. The following NetApp document summarises the problem and possible solutions: http://media.netapp.com/documents/tr-3747.pdf

OUTPUT¶

To run this tool on a disk image directly, use the -a option:

 $ virt-alignment-scan -a winxp.img
 /dev/sda1        32256          512    bad (alignment < 4K)
 $ virt-alignment-scan -a fedora16.img
 /dev/sda1      1048576         1024K   ok
 /dev/sda2      2097152         2048K   ok
 /dev/sda3    526385152         2048K   ok

To run the tool on a guest known to libvirt, use the -d option and possibly the -c option:

 # virt-alignment-scan -d RHEL5
 /dev/sda1        32256          512    bad (alignment < 4K)
 /dev/sda2    106928640          512    bad (alignment < 4K)
 $ virt-alignment-scan -c qemu:///system -d Win7TwoDisks
 /dev/sda1      1048576         1024K   ok
 /dev/sda2    105906176         1024K   ok
 /dev/sdb1        65536           64K   ok

Run virt-alignment-scan without any -a or -d options to scan all libvirt domains.

 # virt-alignment-scan
 F16x64:/dev/sda1      1048576         1024K   ok
 F16x64:/dev/sda2      2097152         2048K   ok
 F16x64:/dev/sda3    526385152         2048K   ok

The output consists of 4 or more whitespace-separated columns. Only the first 4 columns are significant if you want to parse this from a program. The columns are:

col 1

The device and partition name (eg. "/dev/sda1" meaning the first partition on the first block device).

When listing all libvirt domains (no -a or -d option given) this column is prefixed by the libvirt name or UUID (if --uuid is given). eg: "WinXP:/dev/sda1"

col 2

the start of the partition in bytes

col 3

the alignment in bytes or Kbytes (eg. 512 or "4K")

col 4

"ok" if the alignment is best for performance, or "bad" if the alignment can cause performance problems

cols 5+

optional free-text explanation.

The exit code from the program changes depending on whether poorly aligned partitions were found. See "EXIT STATUS" below.

If you just want the exit code with no output, use the -q option.

OPTIONS¶

--help

Display brief help.

-a file

--add file

Add file which should be a disk image from a virtual machine.

The format of the disk image is auto-detected. To override this and force a particular format use the --format=.. option.

-c URI

--connect URI

If using libvirt, connect to the given URI. If omitted, then we connect to the default libvirt hypervisor.

If you specify guest block devices directly (-a), then libvirt is not used at all.

-d guest

--domain guest

Add all the disks from the named libvirt guest. Domain UUIDs can be used instead of names.

--format=raw|qcow2|..

--format

The default for the -a option is to auto-detect the format of the disk image. Using this forces the disk format for -a options which follow on the command line. Using --format with no argument switches back to auto-detection for subsequent -a options.

For example:

 virt-alignment-scan --format=raw -a disk.img
    

forces raw format (no auto-detection) for "disk.img".

 virt-alignment-scan --format=raw -a disk.img --format -a another.img
    

forces raw format (no auto-detection) for "disk.img" and reverts to auto-detection for "another.img".

If you have untrusted raw-format guest disk images, you should use this option to specify the disk format. This avoids a possible security problem with malicious guests (CVE-2010-3851).

-q

--quiet

Don't produce any output. Just set the exit code (see "EXIT STATUS" below).

--uuid

Print UUIDs instead of names. This is useful for following a guest even when the guest is migrated or renamed, or when two guests happen to have the same name.

This option only applies when listing all libvirt domains (when no -a or -d options are specified).

-v

--verbose

Enable verbose messages for debugging.

-V

--version

Display version number and exit.

-x

Enable tracing of libguestfs API calls.

RECOMMENDED ALIGNMENT¶

Operating systems older than Windows 2008 and Linux before ca.2010 place the first sector of the first partition at sector 63, with a 512 byte sector size. This happens because of a historical accident. Drives have to report a cylinder / head / sector (CHS) geometry to the BIOS. The geometry is completely meaningless on modern drives, but it happens that the geometry reported always has 63 sectors per track. The operating system therefore places the first partition at the start of the second "track", at sector 63.

When the guest OS is virtualized, the host operating system and hypervisor may prefer accesses aligned to one of:

• 512 bytes

  if the host OS uses local storage directly on hard drive partitions, and the hard drive has 512 byte physical sectors.

• 4 Kbytes

  for local storage on new hard drives with 4Kbyte physical sectors; for file-backed storage on filesystems with 4Kbyte block size; or for some types of network-attached storage.

• 64 Kbytes

  for high-end network-attached storage. This is the optimal block size for some NetApp hardware.

• 1 Mbyte

  see "1 MB PARTITION ALIGNMENT" below.

Partitions which are not aligned correctly to the underlying storage cause extra I/O. For example:

                       sect#63
                       +--------------------------+------
                       |         guest            |
                       |    filesystem block      |
 ---+------------------+------+-------------------+-----+---
    |  host block             |  host block             |
    |                         |                         |
 ---+-------------------------+-------------------------+---

In this example, each time a 4K guest block is read, two blocks on the host must be accessed (so twice as much I/O is done). When a 4K guest block is written, two host blocks must first be read, the old and new data combined, and the two blocks written back (4x I/O).

 $ cat /sys/block/sda/queue/hw_sector_size
 512
 $ cat /sys/block/sda/queue/physical_block_size
 512
 $ cat /sys/block/sda/queue/logical_block_size
 512
 $ cat /sys/block/sda/queue/minimum_io_size
 512
 $ cat /sys/block/sda/queue/optimal_io_size
 0

 $ cat /sys/block/sda/queue/hw_sector_size
 4096
 $ cat /sys/block/sda/queue/physical_block_size
 4096
 $ cat /sys/block/sda/queue/logical_block_size
 4096
 $ cat /sys/block/sda/queue/minimum_io_size
 4096
 $ cat /sys/block/sda/queue/optimal_io_size
 0

 $ cat /sys/block/sdc/queue/logical_block_size
 512
 $ cat /sys/block/sdc/queue/physical_block_size
 512
 $ cat /sys/block/sdc/queue/minimum_io_size
 4096
 $ cat /sys/block/sdc/queue/optimal_io_size
 65536

SHELL QUOTING¶

Libvirt guest names can contain arbitrary characters, some of which have meaning to the shell such as "#" and space. You may need to quote or escape these characters on the command line. See the shell manual page sh(1) for details.

EXIT STATUS¶

This program returns:

• 0

  successful exit, all partitions are aligned ≥ 64K for best performance

• 1

  an error scanning the disk image or guest

• 2

  successful exit, some partitions have alignment < 64K which can result in poor performance on high end network storage

• 3

  successful exit, some partitions have alignment < 4K which can result in poor performance on most hypervisors

SEE ALSO¶

guestfs(3), guestfish(1), virt-filesystems(1), virt-rescue(1), virt-resize(1), http://libguestfs.org/.

AUTHOR¶

Richard W.M. Jones http://people.redhat.com/~rjones/

COPYRIGHT¶

Copyright (C) 2011 Red Hat Inc.

LICENSE¶

This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.

BUGS¶

To get a list of bugs against libguestfs, use this link: https://bugzilla.redhat.com/buglist.cgi?component=libguestfs&product=Virtualization+Tools

To report a new bug against libguestfs, use this link: https://bugzilla.redhat.com/enter_bug.cgi?component=libguestfs&product=Virtualization+Tools

When reporting a bug, please supply:

• The version of libguestfs.
• Where you got libguestfs (eg. which Linux distro, compiled from source, etc)
• Describe the bug accurately and give a way to reproduce it.
• Run libguestfs-test-tool(1) and paste the complete, unedited output into the bug report.